MAN_DZ7_001 Rev 1.1 Flightcell® DZMx Plus Installation Manual
Page 52 of 61
Effective Date: 28 Jun 2021
»
Trip time
»
Daily Flight Time (DFT)
»
Total Airframe Flight Time (TTAF)
»
Engine starts.
»
Landings.
This data can be displayed on the DZMx Plus Control Head, sent to the tracking provider and
sent by email to a nominated email address.
Prerequisites
For the maintenance data to be recorded and sent by email both the outgoing email account
settings in Email Outbox must be set up and the email address for the maintenance reports.
For maintenance data to be included in landing and take-off messages, tracking must be
enabled and either a take-off input or a take-off speed must be configured.
For engine starts to be counted and visible in the Timer page, an oil pressure input must be
configured.
For landings to be counted and visible on the Timer page, either a take-off input or a take-off
speed must be configured.
Configuring Maintenance Data
To specify whether landings and engine start data are to be sent and to enter the
destination email address for the maintenance report use DZMx Connect.
Go to Settings > Preferences > Hobbs and Maintenance to:
»
Count Engine Starts
»
Count landings
»
Send in Tracking Msg.
»
Maintenance Email Address. This can be a different email address to what was
set up in the DZMx Plus Outbox.
