MAN_DZ7_001 Rev 1.1 Flightcell® DZMx Plus Installation Manual
Page 24 of 61
Effective Date: 28 Jun 2021
»
Activate using DZMx Connect. Go to Settings > Audio > ICS1 or ICS2. Select
DONE
when completed.
Configuring Side Tone
Side tone is normally provided by the aircraft audio panel or ICS, but in some
installations may not be available. Side tone can be supplied by the DZMx Plus if
required.
This can be configured using the:
»
DZMx Plus Control Head. Select MENU > Audio > press ENTER > ICS > press
ENTER -`> Mic Bias > press ENTER > select Off or On. Select END to return to
the main screen.
»
DZMx Connect app. Go to Settings > Audio > ICS1 or ICS2. Toggle on Side
Tone.
»
Select Off to disable, When on Call to enable only during a call, or Always On to
leave active all the time. Select OK once you have selected then select
DONE.
Configuring Notification Tones
Notification tones are used to notify the crew of specific events. Notification tones can
be enabled or disabled in the audio menu. Notification tones include:
»
Keypad tones.
»
Message queue full, which sounds when the tracking message queue is full.
»
Warnings, which notify when there is an issue; in this case a popup will show the
details of the issue.
»
Incoming or outgoing Bluetooth call.
Adjusting Audio Volume
Audio levels can be adjusted using DZMx Connect or the DZMx Plus Control Head menu,
however as there is a short lag when using the DZMx Connect, it is recommended that audio
levels are adjusted using the DZMx Plus Control Head menu.
1.
To adjust audio volumes to the ICS (EAR):
»
Set up a call to another party over the satellite or cellular link as appropriate using
Select MENU > Audio > ICS > Ear> press ENTER. Use the LEFT and RIGHT
keys to adjust the audio volume to the preferred level. Select END to save and
return to the main screen.
2.
To adjust audio volumes from the ICS to the DZMx Plus (MIC):
»
Set up a call to another party over the satellite or cellular link as appropriate.
»
Select MENU > Audio > ICS > Mic and use the LEFT and RIGHT keys to adjust
the audio volume to the preferred level. Select END to save and return to the main
screen.
