Flightcell DZMx Plus Скачать руководство пользователя | Manualshive

Страница: 28 / 61

background image

MAN_DZ7_001 Rev 1.1 Flightcell® DZMx Plus Installation Manual

Page 28 of 61

Effective Date: 28 Jun 2021

Configure which modems are used to transmit tracking data

By default, tracking messages are enabled for all modems. If more than one Iridium
device or more than one cell modem is installed, only one of each should be activated
for tracking.
If the internal Iridium 9523 modem is used for Iridium PTT, then the other Iridium
modem (9523 or 9603) or external Iridium device should be configured for tracking.

Configure Iridium or cellular voice calling capability

By default, voice calling is enabled for all modems, except for the Iridium 9603 modem,
which is used for SBD messaging only, and the 450 MHz cellular modem, which is for
data only.

Configure Iridium SBD Transmission

If your Iridium modem has been provisioned to  send SBD messages to your chosen
tracking provider, then  ensure SBD  transmission  is  enabled  for  your  Iridium  device.
If you  do  not wish  your device  to  send  SBD  messages, then disable SBD
transmission.

Configure the Iridium Service Centre

Most Iridium accounts use the standard Iridium Service Centre for handling Short
Message Network (SMS) messages. However, some Iridium Service Providers use
different Secure Server Networks (SSNs) e.g. Telstra and Pivotel in Australia.
If (No  SMS) is  displayed next  to  the Iridium  modem's  status message on the DZMx
Plus display,  the  service centre  number is  incorrectly set. The service centre number
can be selected:

»

Use DZMx Connect. Go to Settings > Modem. Select Modem settings 1 and
insert the Call Forward Number and toggle Call Forwarding Enable on.
Select

DONE

.

»

Use the DZMx Plus control head. Go to MENU > Hardware Config > Modem
Config > Iridium Modem 1 > Service Centre Number > and select the correct
option.

Configure the cellular APN

It is necessary to set the Access Point Name (APN) for the cellular modems to allow
the modem to use cellular data services. You will need to determine the APN for your
cellular provider. This is often but not always

“

Internet

”

.

Enable or disable data

Use this setting to enable or disable data services for the selected modem.

Data Roaming

If a cell modem is operated outside its home country, it is usually necessary to activate
data roaming to allow use of local cellular services.

«
...
26
27
28
29
30
...
»

Содержание DZMx Plus






























































Отзывы:

Нет отзывов

Похожие инструкции для DZMx Plus

Бренд: CAME Страницы: 32

Бренд: LENCO Страницы: 27

Бренд: Xantrex Страницы: 4

Бренд: Xantrex Страницы: 20

Бренд: Beyerdynamic Страницы: 112

SoundPoint IP 501 SIP 2.2

Бренд: Polycom Страницы: 29

BeoSound 3000 2671

Бренд: Bang & Olufsen Страницы: 68

Бренд: 2VV Страницы: 29

ControlLogix 1756-CNB

Бренд: Allen-Bradley Страницы: 36

Бренд: Saltillo Страницы: 2

Бренд: Vivax Страницы: 68

Бренд: vistaCNC Страницы: 6

Бренд: Legacy Страницы: 25

Bell'O Digital BDSW-1650-BLK

Бренд: Twin-Star International Страницы: 20

Бренд: L.J. Wing Страницы: 60

Бренд: Sailor Страницы: 38

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды