Use and operation
68
7.2.3
Emptying the trailer
-
There must be no objects or persons within the 25 m danger area.
-
During unloading, there is a risk of injury due to the rear panel swivelling out and the load being
pushed out. Ensure that there are no persons in the danger area behind the trailer when unloading.
-
During push-off, there is a risk of damage to the grate extension.
-
If necessary, fold the grate extension down.
-
Apply hydraulic pressure to the hydraulic circuit for the rear panel and push-off process.
-
The rear panel moves up out of its retainer and swings open to the rear.
-
Extend the moving panel and sliding floor hydraulically; the load is then pushed off.
-
Retract the moving panel and sliding floor again.
-
Close the rear panel.
Emptying through the grain hatch
When emptying grain through the grain hatch, the
working pressure must not exceed
80 bar
.
Otherwise the rear/side panel may be damaged.
No pressure restriction is fitted!
Fig. 66
:
Working pressure gauge for
the sliding unit
Caution: Maximum working pressure: 80 bar; otherwise the rear/side panel may be
damaged.
First, move the sliding unit forwards. Then close the rear panel.
Otherwise the sealing strip may be damaged.
The tension cable can be removed when transporting lightweight goods.
Particular care must be taken when reversing for emptying purposes.
