Flexim FLUXUS G800, Руководство пользователя

Страница: 113 / 161

16 Settings FLUXUS G80x
UMFLUXUS_G8V4-6-1EN, 2018-10-10 113
16 Settings
16.1 Time and Date
The transmitter has a battery-powered clock. Measured values are automatically stored with the date and time.
16.1.1 Time
16.1.2 Date
After the time has been set,
DATE
is displayed.
16.2 Dialogs and Menus
16.2.1 Pipe Circumference
Select
Special Funct.
\
SYSTEM settings
\
Set Clock
.
Press ENTER.
The current time is displayed. Select
ok
to confirm the time or
new
to set the time. Press
ENTER.
Select the character to be edit with key .
Edit the selected character with key and CLR. Press ENTER.
The new time is displayed. Select
ok
to confirm the time or
new
to set the time again. Press
ENTER.
Select
ok
to confirm the date or
new
to set the date. Press ENTER.
Select the character to be edit with key .
Edit the selected character with key and CLR. Press ENTER.
The new date is displayed. Select
ok
to confirm the date or
new
to set the date again.
Press ENTER.
Select
Special Funct.
\
SYSTEM settings
\Dialogs/Menus. Press ENTER.
Note! The settings will be stored at the end of the dialog. If the menu item is quit by pressing key BRK, the
changes will not be stored.
Select
on
if the pipe circumference is to be entered instead of the pipe diameter in the pro-
gram branch
Parameter
. Press ENTER.
If
on
is selected for
Pipe Circumfer.
, the outer pipe diameter will nevertheless be re-
quested in the program branch
Parameter
.
To select the menu item
Pipe Circumfer.
, enter
0
(zero).
Press ENTER.
The value displayed in
Pipe Circumfer.
is calculated on the basis of the last displayed
value of the outer pipe diameter.
Example: 100 mm
.
π = 314.2 mm
SYSTEM settings ↕
Set Clock
TIME 11:00
ok >NEW<
TIME 11:00
Set Time !
TIME 11:11
>OK< new
DATE 2011-01-15
ok
>NEW<
DATE 2011-01-16
Set Date
!
DATE 2014-10-23
>OK<
new
SYSTEM settings ↕
Dialogs/Menus
Pipe Circumfer.
off
>ON<
Outer Diameter
100.0 mm
Pipe Circumfer.
314.2 mm