FlexiForce ForceIQ Force100XC, Руководство пользователя

Страница: 18 / 42

manual – force IQ
18
www.flexiforce.com
18
3.4.4. Safety Device
Depending of what kind of safety device is used, you can choose between following
actions when safety device is triggered.
•
Down full reverse :
door returns to top end position, by activation while door is closing.
•
Down part reverse:
door returns a couple of cm, by activation while door is closing.
•
Down stop:
door stops, by activation while door closing.
•
Pull‐in protect:
door stops by activation while door go's up.
•
Down full /sw off: to adjust the position to deactivated the photocell that is active in downward
direction. Use the buttons to adjust the position to deactivated the photocell.
•
Pull‐in masked: to adjust the position to deactivated the photocell that is active in upward direction
Use the buttons to adjust the position to deactivated the photocell.
Use the or buttons to select one of the following menu items:
1) 4‐wire photocell KL5
2) 2‐wire photo KL6
3) OSE 1 setup KL3
4) OSE 2 setup KL4
5) Safety 1 KL2 1‐2
6) Safety 2 KL2 3‐4
7) Reverse Delay
8) Fine pitch disable photoc.
Press to enter the selected menu item.
1) 4‐wire photocell KL5: Use the or buttons to select one of the following menu items:
•
Disabled:
When KL5 is not in use
•
Light curtain:
When a light curtain is connected
•
Untested:
When a photocell is connected without a self test
•
Tested:
When a photocell is connected with a self test (switch on 24V test voltage for test)
•
Tested inv.
When a photocell is connected with a self test (switch off 24V test voltage for test)
2) 2‐wire photo KL6:
Not in use
3) OSE 1 setup KL3 : Use the or buttons to select one of the following menu items:
•
Disabled:
When KL3 is not in use
•
OSE:
When safety device that works with OSE signal is connected e.g. opto sensors
•
3‐w photoc.:
When a 3 wired photocell is connected