Flexco FL-L-EC, Инструкция по установке, эксплуатации и обслуживанию

Страница: 37 / 56

37
4.5 Use of the Transport Carriage (Optional) continued
Section 4 – Transport
Removing Flex-Lifter from the transport carriage
Proceed by carrying out the assembly process in reverse:
1 Remove the handlebar from the troughing belt (see Figure 21, Pos. 6 and 7).
2 Remove the pin from the bore hole (see Figure 20, Pos. 4).
3 Remove the tube of the wheel frame (Figure 20, Pos. 5) from the troughing belt opposite.
4 Insert the pin back into the intended hole on the troughing belt, and secure it with the cotter pin (see
Figure 19, Pos. 1 and 2).
5 Insert the handlebar of the transport carriage into the intended hole the tube on the wheel frame, and
secure it with the cotter pin (see Figure 18, Pos. 4)
The device can only be used in the deployment location.