Flexco FL-L-EC, Инструкция по установке, эксплуатации и обслуживанию

Страница: 35 / 56

35
4.5 Use Of The Transport Carriage (Optional)
Section 4 – Transport
Fig. 18
Empty transport carriage (optional)
Pos. Designation Pos. Designation
1
Wheel frame, wheels with axes
and tubes
3 Groove on the tube
2 Tube of the wheel frame 4
Removable handle bar with 2
cotter pins
Preparation
Remove the handlebar from the tube of the wheel frame (see Figure 18). To do this, remove one of the
cotter pins and pull the handlebar out of the tube.
Attaching Flex-Lifter to the Transport Carriage
See Figure 19 to Figure 22.
1 Remove the cotter pin (see Figure 19, pos. 1) and the pin (see Figure 19, Pos. 2) on one of the
troughing belts.
2 Slide the tube of the wheel frame (see Figure 20, Pos. 5) through the troughing belt, into the tube of
the Flex-Lifter (see Figure 20). The groove on the tube (Figure 20, pos. 3) must be able to cover the
bore hole for the pin (Figure 20, Pos. 4) on the troughing belt.
3 Then insert the pin back into the bore hole on the troughing belt (see Figure 20, Pos. 4) and secure it
by inserting the cotter pin (see Figure 19, Pos. 1).
1
2
3
4