4. If installing a safety rail at the head section of the bed, place the holes in the
middle of the “L” shaped brackets on to the bolts making sure that the pointed
end of the safety rail points toward the foot end of the bed (Fig. 13). This step
is performed much easier with the assistance of a 2nd person.
5. If installing a safety rail at the foot section of the bed, place the holes in the
middle of the “L” shaped brackets on to the bolts making sure that the pointed
end of the safety rail points toward the head end of the bed (Fig. 14). This step
is performed much easier with the assistance of a 2nd person.
6. Replace the nuts removed in step 3 and tighten them down with a 9/16
wrench (Fig. 15).
Remember: your Flexabed side rail can be lowered to allow for easy entry to
and from the bed. Simply pull
UP on the side rail and swivel the side rail to the
lowered position (Fig. 14 & 15).
When installing safety rails on a twin sized Hi-Low bed, the brackets will contact
the metal bed frame when the bed is in the lowered position. This is normal and
does not void your warranty.
If you ordered safety rail covers, be sure to install the cover over the pointed-end
of the safety rail first (Fig. 16). Pull the safety rail over the back side of the safety
rail by stretching the cover slightly. This will require some force but the cover is
designed to fit tight over the safety rail. If you have ordered a safety rail cover set,
you can choose to install your covers to where the storage pocket faces either the
inside or outside of the bed.
FIG. 15
FIG. 14
FIG. 13
FIG. 16
8
