the bed will return to the flat position. The emergency lowering button also serves
as the pairing button for syncing the bed to your compatible Bluetooth device or
syncing the control box to a new hand control in the event of a service replace-
ment. Pairing instructions for Bluetooth and remote syncing are covered later in
this manual on page 12.
S T E P F O U R
Power Supply & Cables
Your bed’s power supply is mounted to the head platform section underneath
the bed. Insert the electrical plug from the power supply (Fig. 7) in to a standard
110/120 volt household electrical outlet. The power supply has a small indicator
light that will illuminate green if it is properly receiving electrical power. If you
have plugged the power supply in to a wall receptacle and the indicator light does
not illuminate green, you will need to check your cable connections and your wall
receptacle. All electrical and motor cables should already be connected to their
appropriate sources when the bed is shipped from the factory. In the event that
a cable has become disconnected during shipping or installation, refer to “Cable
Connections” on pages 14-16 in this operations manual to reconnect cables.
We
strongly recommend that you plug your bed into a surge protector to prevent
damage to the electronics of the bed in the event of a power surge in your home’s
electrical system. Flexabed’s warranty does not cover damages to the bed as the
result of a power surge.
FIG. 7
PLUG INTO WALL
INDICATOR LIGHT
TO HEAD MOTOR
3-WAY SPLITTER
5
