11
O P T I O N A L
Massage System
All Flexabed Hi-Low remotes come with massage operation buttons
whether your bed was ordered with massage or not. If you did not
order a massage option when you purchased your bed then all of
the massage-related buttons will not be operable. If desired, you
can order a massage system from your Flexabed dealer at anytime
for the life of your bed.
To activate the massage system, press the “On/Off” button.
This will activate both head and foot massage motors in the
“constant” mode. Both the head and foot massage motors have
three intensity settings: low, medium and high. You can adjust the
intensity setting on either massage motor by pressing the “+” or “-“
button one time for each level of intensity you want to adjust. You
can turn either of the massage motors off by continuing to press
the “-“ button for the motor that you want to deactivate.
To activate the wave massage mode, press the massage wave
mode selector button. Once you press this button, one of the mas-
sage wave mode indicator lights will be illuminated indicating which
wave cycle you have selected. The light on the far left indicates a
longer wave frequency while the button on the far right indicates
a shorter wave frequency. You can change the wave frequency by
pressing the massage wave mode selector button.
O P T I O N A L
Underbed Lighting
All Flexabed Hi-Low remotes come with an underbed lighting control
button whether your bed was ordered with underbed lighting or
not. If you did not order underbed lighting when you purchased
your bed then the “Light” button will not be operable. If desired, you
can order an underbed lighting system from your Flexabed dealer.
M E M O R Y
Positions
Your Flexabed allows you to store 3 of your own custom memory
positions. To program your custom memory position you will need
to do the following:
1. Adjust the bed to the position you want to save to memory
2. Press and hold the “Set” button for 5 seconds until you hear
a beep noise from the control box, then release the button.
3. Press and release the memory button you want to program
(M1, M2 or M3). You should hear a beep noise from the control
box to confirm programming.
