15 |
P a g e
1.
Click the option named
Event List from Text File
2.
Click
Import Event List Text File.
3.
Browse to the folder containing the event list text file, select the file and click
Okay
.
Click
OK
to save your settings and close the configure window.
3.2
Network Information
Multiple computers are often used when running a meet. The computers must be networked, and
firewall and network profile must be set correctly for the computers to communicate. FT-FAT allows
you to check your network settings and change the firewall settings and network profile if you have
administrator privileges.
Click
Network Information
at the bottom of the Configure window
or select
View Computer and Setup
from the main screen to bring up the Network and Setup window to check settings.
The Network Tab displays the computer name, available networks, the networks’ profiles and firewall
status. If multiple networks are in use, they will show in the network table along with their IP address,
Subnet Mask and network speed. Networked computers must be on the same network and have same
sub-network to communicate.
Network Profile
shows the network name and profile type. If using the POE switch that is provided with
the FlashTiming system, the network is listed as “Unidentified Network”. Set this network to private.
Firewall
– FlashTiming must be allowed through the firewall to access the camera and other computers
on the network. The best practice to allow just the application through the firewall. FT-FAT sets the
access when starting the application. If this operation is not successful and you cannot see the cameras
or other computers, change the firewall settings to
OFF
.
Folders
– The folder tab shows your current video capture and meet management folders.
