background image

FTS 350i-2 USER MANUAL 

Flash Technology, LLC 

Revision A – 4/21/2022 

FRONT MATTER 

ABSTRACT 

This manual contains information and instructions for installing, operating and maintaining the FTS 350i-2 LED 
integrated beacon. 

COPYRIGHT 

©2022, Flash Technology, LLC. All rights reserved.  

Reproduction or use of any portion of this manual is prohibited without express written permission from Flash 
Technology and/or its licenser. 

TRADEMARK ACKNOWLEDGEMENTS 

Flash Technology® and Vanguard® are registered trademarks of SPX Corporation. 

All trademarks and product names mentioned are properties of their respective companies, and are recognized 
and acknowledged as such by Flash Technology. 

APPLICABLE SPECIFICA TIONS 

The FTS 350i-2 beacon meets or exceeds requirements for an FAA Type L-864 beacon. Additionally, the FTS 350i-2 
beacon meets or exceeds requirements for an ICAO Annex 14, Volume 1, 8th Edition Medium-Intensity Type B 
Obstacle Light. 

DISCLAIMER 

While every effort has been made to ensure that the information in this manual is complete, accurate and up-to-
date, Flash Technology assumes no liability for damages resulting from any errors or omissions in this manual, or 
from the use of the information contained herein. Flash Technology reserves the right to revise this manual 
without obligation to notify any person or organization of the revision. 

In no event will Flash Technology be liable for direct, indirect, special, incidental or consequential damages arising 
out of the use of or the inability to use this manual. 

WARRANTY 

Flash Technology warrants all components, under normal operating conditions, under a 5-year parts replacement 
warranty. 

PARTS REPLACEMENT 

The use of parts or components in this equipment that are not manufactured or supplied by Flash Technology 
voids the warranty and invalidates the third party testing laboratory certification which ensures compliance with 
FAA Advisory Circulars 150/5345-43J, 150/5345-53D and Engineering Brief No. 67D. The certification is valid as 
long as the system is maintained in accordance with FAA guidelines (FR doc. 04-13718 filed 6-16-04). 

 

 

Содержание FTS 350i-2

















Отзывы: