manualshive.com logo in svg

FläktGroup Multi-DENCO, Руководство по эксплуатации

Поделиться
Скачать
FläktGroup Multi-DENCO Скачать руководство пользователя страница 17

Multi

-DENCO

Safety and User Information

FläktGroup DC-2013-0101-GB • Subject to modifications • R4-05/2018

17

2

Safety and User Information

The 

Multi

-DENCO range is designed in accordance with state-of-the-art technological 

and engineering standards as well as in conformity with the recognized safety regula-
tions.

It must be used in an appropriate manner for suitable purposes, following the details 
contained within this manual and taking account of safety aspects and potential 
hazards.

Failure to follow the instructions in this manual may result in danger to health and 
safety, damage to materials and incorrect unit operation. Information within this 
document advises on, but is not limited to, potential threats or concerns related to 
health and safety. All users 

must

 be, or employ, a trained professional to, assess 

issues relating to health and safety, 

before

 any handling the 

Multi

-DENCO unit.

2.1

Availability of the operation manual

This operation manual contains important information regarding safe and correct ope-
ration of the unit.

This manual must always be available at the site where unit is operating. Every person 
working on the equipment must read this manual fully before commencing the work 
and take note of all relevant information while performing a task.

The operation manual is intended to be used by fitting and installation companies, buil-
ding services engineers, technical personnel or trained persons as well as electrical 
and refrigeration engineering specialists.

2.2

Scope of the operation manual

T

HIS

 

IS

 

AN

 

ORIGINAL

 

OPERATION

 

MANUAL

 

VERIFIED

 

BY

 

THE

 

MANUFACTURER

.

This document has been developed by the manufacturer specifically for details relating 
to the 

Multi

-DENCO range. Information within this document may be common to other 

designs or products, but the information contained is 

exclusive to 

Multi

-DENCO

 and 

non-transferable

. The information should not be used as a basis for any other pro-

ducts.

Every effort is made to ensure that information contained within this manual is fair and 
accurate, but FläktGroup endeavours to continuously update and improve all of our 
products for our customers. Due to this continuous development, some information 
contained within this manual may become outdated or no longer relevant. If you are in 
any doubt regarding any information contained within this document, please contact 
your local sales or support representative who will be happy to assist and enquire 
further for you.

Содержание Multi-DENCO

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды