Fit4Home HJ-R2P7-PGFJ, Руководство пользователя

Страница: 11 / 25

11
ASSEMBLY INSTRUCTIONS
STEP 2
1. Connect the bracket bottom pipe (A3) using washer (B14).
2. Insert the guide rod (A5) through the rubber ring (D2) into the two holes of the rear bottom
pipe (A3) and then fix it with bolts (B9) and washer (B15) from the bottom.
3. Place the weight plate (D9) in the guide rod (A5), (pay attention to personal safety).
4. Place the positioning sleeve (D1) on the weight selection tube (A6) and fix it with the fixed pin
(C2) then place the weight block top piece (D8) above the weight selection tube (A6).
5. Insert the selector pin (C1) through the heavy block (D9) into the hole of the weight selection
tube (A6).
NEEDS DIAGRAM IMAGE