Fisher & Paykel DH8060C, Инструкция по установке/Руководство пользователя

Страница: 32 / 40

30
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Clothes getting too
hot or damaged
Cycle selected not
appropriate for the load. Ensure the cycle selected is
appropriate for items in the load.
Refer to ‘Drying cycles’.
Items removed from dryer
before the end of cycle cool
down had finished. Removing items before cool down
may damage clothing if it is not
spread out and exposed to air to
cool once removed from the dryer.
Dryer is beeping
and displaying
a code on the
digital display Dryer has a fault. Try turning the dryer off and waiting
30 seconds before turning it back on.
Refer to ‘Fault codes’.
Small puddle
of
water coming
from under
the
machine
Water tank not correctly
in place. Ensure the water tank is correctly
in place.
Water tank may need
to be emptied. Refer to ‘Emptying the water
collection tank’.
Water tank may be damaged. Check the water tank for any signs
of damage.
Drain hose may not be
attached properly at the
machine end. Ensure the drain hose is attached
properly. Refer to ‘Draining’ in the
installation section of this guide.
Drain hose could be damaged. Check the drain hose for damage.
Drain hose has slipped
out of the drain. Ensure the drain hose is securely fixed
in place. Sometimes drain hoses can
move or get displaced, which may
lead to water draining onto the floor.
Drain may be blocked. Check the drain for any blockages.
Dryer door not closing
properly, affecting the seal. Ensure the dryer door is closed
properly and there is nothing
obstructing the door opening.
Small amount
of
water in
the drum at
end of cycle
Water tank needs to be
emptied. Refer to ‘Emptying the water
collection tank’.
Environmental conditions may
be affecting dryer operation. If conditions are particularly hot,
humid or cold, it is possible vaporised
water may re-condense in the drum or
on the inside of the door.