19
GETTING STARTED QUICKLY
●
●
Check if the lint filter is clean and the water tank is empty before every load.
Ensure both are replaced correctly before using your dryer.
●
●
Sort and load items into the dryer drum, ensuring no items are in the way of the door.
Close the door (you will hear it click shut).
1
Press ‘POWER’ to activate your dryer.
2
Your dryer will default to the ‘Everyday’ cycle. Select your desired drying cycle
by turning the control dial.
3
To change the default settings for the cycle, select your preferred drying option
using the digital display panel.
4
Touch the
button to start the cycle.
●
●
If you make an invalid selection, the dryer will beep to alert you.
●
●
When the cycle finishes, your dryer will beep and then turn off automatically.
If the ‘Wrinkle Free’ option has been selected the machine will rotate the drum
periodically blowing cool air into the drum to help minimise wrinkling and creasing
of your load. Remove the items from the dryer at the earliest opportunity.
●
●
If you wish to change a cycle or select a different option once a drying cycle has
started, touch
to pause the cycle, then select the new cycle or option.
Touch
to restart the dryer with the new cycle and/or settings.
IMPORTANT!
●
●
If you wish to stop the dryer before the cycle has finished, you MUST remove
the clothes IMMEDIATELY and spread them out to cool. DO NOT leave the clothes
in the
dryer or bunched up in a clothes basket. Take extreme care as the drum
and the
load items may be hot.
●
●
Failure to follow the advice in this guide may result in damage to your garments
and
your expectations of drying performance may not be met.
Содержание DH8060C
Страница 1: ...INSTALLATION GUIDE USER GUIDE NZ AU HEAT PUMP CLOTHES DRYER DH8060C DH9060C models ...
Страница 2: ......
Страница 4: ......
