Fisher & Paykel DH8060C, Инструкция по установке/Руководство пользователя

Страница: 22 / 40

20
Delay Start
The ‘Delay Start’ option enables you to delay the start of the drying
cycle from between 15 minutes and 12 hours. Delayed start options are
15 minutes, 30 minutes, 1 hour, then hourly up to 12 hours. This can be
useful to time your drying to finish when you arrive home from work,
or to start when power rates are lower.
To ‘Delay Start’ your cycle:
1 Select the cycle using the control dial.
2 Use the buttons to increase and decrease the ‘Delay Start’ time.
3 Touch the button to confirm.
4 Touch the to start the cycle.
5 The display will indicate the time until the cycle will start.
IMPORTANT!
We suggest that you avoid using ‘Delay Start’ for damp, non-colourfast items as
this may cause dye run to occur.
Favourite
After using your dryer a few times you may discover there are some drying options
you prefer for some cycles. You can programme your dryer to remember the drying
options you prefer for each drying cycle. There are two options for making a drying
cycle a favourite.
At the end of a cycle:
1
The display will show the cycle used and the status as complete
with a question ‘Save as favourite?’.
2
To accept touch the button.
3
The display will show the setting has been saved.
4
The cycle will now show with a indicating the cycle has been
saved as a favourite.
From ‘Options’:
1
Select the cycle using the control dial.
2
Select start time (‘No Delay’ or ‘Delayed Start’ time of your choice).
3
Scroll through the ‘Options’ using the buttons until ‘Favourite’,
touch the button to select.
4
Touch the again to save as a favourite.
5
The cycle will now show with a indicating the cycle has been
saved as a favourite.
Note: Favourites can only be removed by using ‘reset defaults’ in the settings menu.
When ‘reset defaults’ is selected all favourites saved for all cycles will be removed.
CUSTOMISING DRYING CYCLE
Start in 2hrs
Everyday
Auto
Everyday
Complete
Save as Favourite ?
Favourite
Option
Save?