Fischer Panda 22-4 HD PVMV-N, Руководство пользователя

Страница: 82 / 154

Generator Operating Instructions
Seite/Page 82 Panda 8000-42NE PVMV-N.R01 - Kapitel/Chapter 6: Generator Operating Instructions 10.5.11
dards.
Full voltage connections are mounted in the electrical cabinet. It must be ensured that the electrical cabinet is secu-
red and closed while the generator is running.
The starter battery cable should be disconnected when work is being done on either the generator or the electrical
system in order to prevent accidental starting of the generator.
6.4.5 Instructions for Capacitors
The generator's electrical system requires two different groups of capacitors:
A) The booster capacitors
B) The operating capacitors
Both types are mounted in the electrical cabinet.
Capacitors store an electrical charge. It is possible that even after they have been disconnected stored energy is still
held. Therefore it is essential that the connectors are not touched.
Should it be necessary to check or test the capacitors, they should be shorted out by using an insulated screw driver.
The operating capacitors are automatically discharged when the generator is stopped in the normal way. The boo-
ster capacitors will be discharged through internal resistor´s.
For safety however, the capacitors have to be discharged (short circuited) prior to carrying out any work on the AC-
Control box.
CAUTION!
Danger to Life - High voltage
Do not touch the capacitor contact terminals!
6.4.6 Operating Control System on the Panda Generator
Panda generators are equipped with various sensors. One of these sensors is to stop excitation should a short cir-
cuit occur. The combustion engine is further equipped with a oil pressure control switch, which switches the motor
off, if the oil pressure sinks to a particular level. Apart from this, all generators are equipped with temperature swit-
ches.