Fischer Panda 22-4 HD PVMV-N, Руководство пользователя

Страница: 56 / 154

Installation Instructions
Seite/Page 56 Panda 8000-42NE PVMV-N.R01 - Kapitel/Chapter 5: Installation Instructions 10.5.11
5.2.3 Fuel System Installation
A fuel filter with water separator is already installed at the generator. Generally fuel intake and fuel return must be
attached with its own fuel intake at the Diesel tank.
If the generator is installed more highly than the tank, the return pipe should be led to the tank up to the same sub-
mergence into the tank as the sucking in line, in order to avoid that after the shut-off the generator the fuel can run
back into the tank, which leads to substantial initial problems after longer shut-off the generator.
If the return pipe cannot put as immersion tube into the tank, it should be absolutely ensured by a non-return valve in
the sucking in line that the fuel cannot flow back after shut-off the generator.
Basically the Panda is airing out. After the first line-up or after longer downtime the notes "Ventilation of the Fuel
System" should be considered.
see “Air-bleeding of the Fuel System” on page 89.
5.2.3.1 The following components must be installed:
1. Fuel pre-filter
2. external fuel pump
3. non-return valve
The external electrical fuel pump is to be installed in the proximity of the tank.
Fig. 5.2.3-1: Fuel System installation - Scheme
5
2
3
4
1
1. Generator
2. Non-return valve
3. External fuel pump 4. External fuel filter
5. Fuel tank