ROTOTERM MR-TR
13
www.first.si
DESCRIPTION OF CON TROL PANEL
NOTE:
LCD display room temperature does not affect the operation of automation. It is intended only to indicate the
temperature of the room in which it is installed!
ROOM UNIT AS 2000-E
(only in complet ROTOTERM MR-TR “plus”)
LEGEND :
1 - slide switch 1: working regime
1 (
- Non-stop working on higher
(comfort) temperature
AUTO - Automatic working according
set program
0 ( ) - Non-stop working on lower
(economic) temperature
2 - slide switch 2: time and program setting
- time and day setting
RUN - timer working
- program setting
3 - LCD display for exact time and state of program
4 - LCD display for room temperature
5 - Slide switch for choosing way of op er ating
- (Protection against freezing (8°C)
- Automatic working according set program
6 - Knob for setting higher
(comfort) temperature
7 - Knob for setting lower (economic) temperature
8 - key for the tem po rarily manual override of program till
next program step
9 - key for setting minutes
10 - key for setting hours
11 - key for setting the day of the week
12 - key for input the program
13 - key RESET (deletes time and program)
14 - Slide switch for unit operation
ON -
temperature control of mixed flow dependents on
exterior and internal room temperature (normal
operation)
OFF - temperature control of mixed flow dependents on
exterior temperature (based on heating curve)
LCD display
Day of the week
1-monday, 2-tuesday, ..., 7-sunday
High, comfort
temperature
Time: hours and minutes
Temperature correction
Room unit has the option of setting the two temperature levels, namely higher comfort level - (
) and lower economical
level - ( ). Setting the higher and lower temperatures are independent of each other.
If you set the heating curve between 0.5 and 1 and you have average heating system, will control
knob to the higher temperature
in the middle position provides room temperature between
20°C and 21°C.
Setting the lower temperature in the middle position provides room temperature between
17° and 18°C.
Rotate buttons to the left or right allows you to set the room temperature within about ±4°C (from
the starting position of the middle button - depends of parameter E).
