ROTOTERM MR-TR
12
www.first.si
CONTROLLER PARAMETER SETTING
Controller room unit
The ROTOTERM MT-TR controller can be used connected with the following units:
1. Room unit AS 2000-E
Programmable room unit AS 2000-E with incorporated digital timer is an electronic time switch which is
used for programming daily and weekly mode of operation. Two temperature levels can be set - day time
and night time level. The design of the timer en ables simple operation with keys as well as control of actual
hour, day and heating conditions in any time. Additionally it is equipped with room temperature display.
Room unit AS 2000-E has additional switch on the right side. It makes possible to choose two heating
regimes:
- temperature control of mixed flow dependents on exterior and internal room temperature (normal
operation)
- temperature control of mixed flow dependents on exterior temperature
2. Operation without room unit
When ROTOTERM MT-TR controller is used only as controller of mixed flow temperature with dependence to exterior temperature,
the room unit or the room corrector shall not be connected to terminal pins 5 and 6. In this case the influence of the room unit must
be switched off - the parameter [E] shall be set to value 0 (see chapter: “Setting of room unit influence parameter [E] ).
