First Degree Fitness Viking Rower, Руководство пользователя

Страница: 15 / 20

Detaching the rower belt:
1. To detach belt, simply pull beyond the range of the nor-
mal rowing stroke until the belt detaches from the belt
bungee pulley.
Tip: You’ll hear the Velcro separating just before the
belt detaches.
Reattaching the rower belt:
1. Begin reattaching the rower belt by threading
around the rower belt pulley with the Velcro side
facing upward as illustrated.
Velcr
o
2. Next, thread the belt around the idle wheel as
shown. Once around the idle wheel, attach the
rower belt to the belt/bungee pulley. There is
an obvious “lip” at the attachment point.
Idle Wheel
2. Unhook the bungee shock
cord from the rear leg. Then,
push out the inner clip from
the bungee hook end frame.
Pull the bungee through the
inner clip until free. This will
allow for the bungee shock cord to be threaded completely
out of the main frame and up to the belt bungee pulley where
it will be re-attached once the rower belt is in the proper posi-
tion.
Bungee hook
end frame
Inner clip