First Degree Fitness MEGA PRO XL, Руководство пользователя

Страница: 12 / 28

12
Installing Rower Seat into the Side Rails
Slide the Assembled Rower Seat into the Side Rails as
shown. The Seat Indentation must be towards the rear
of the Rower.
Assembly Instructions
STEP 7
STEP 8
Install the Rear End Cap[9] to the Side Rails[2] using 4x
M6 x10 Bolts[16] and 4x M6 Washers[13].
Installing the Rear End Cap
(with Rubber Pads)
M6x10mm Bolt
M6 Washer
with Rubber Pads
Indentation
REQUIRED
Side Rail [2]
Rear End Cap [with Rubber
Pads [9]
4x M6 Washer [13]
4x M6x10mm Bolts [16]
Do not put fingers in
between Side Rail and
wheel carriage.
Note: Clean Wheels
and tracks weekly with a
soft dry cloth in order to
decrease the rate of wear
on both Wheels and track.
WARNING