31
The Log Record: The Firetron 1000 Data Logging provides a means of storing data samples for
recording or analysis. The display menu options allow the user to configure the data log to a conve-
nient format (See Operating Procedure -Data Logging).
Each data log record contains the following data:
Fuel Type
Unit No.
Wet/Dry Analysis
O
2
Normalization ON/OFF
Date
Time
Ambient Probe Temperature
Probe Temperature
Up to 3 Gas Readings (where applicable)
NO
x
Concentration (where applicable)
CO
2
Concentration
Fuel Efficiency
Excess Air
Percent Water
O2 Normalization Factor
4.4 SERIAL
PORT
NOTE: The Serial Port on the Firetron 1000 must be set for:9600 baud; no parity; eight bits; one
stop bit.
NOTE: Failure to enter the values as above will render the serial port useless when running the Fir-
eye CAPTURE program.
Baud Rate: 1200 - 19200
Parity: No/Odd/Even
Data Bits: 7/8
Stop Bits 1/2
RS232 Serial Output
The serial output is user configured from the menu for baud rate, stop bits etc.
This port has 2 functions;
1.
To send data to a serial printer. For example an Epson printer (printer must have XON/XOFF
protocol).
EXIT
GASES
BAUD RATE:
PARITY:
DATA BITS:
STOP BITS:
1200-19200 SELECTABLE
NO/ODD/EVEN
7/8
1/2
F1
F2
F3
F4
HELP
ABORT
