Firetide HotPort 5020-LNK, Руководство по установке

Страница: 38 / 46

Troubleshooting
32
Replacing a HotPort 5020-LNK node
If one of the HotPort 5020-LNK nodes stops working and the product is within
the warranty period, you should call customer service for replacement options.
Use these procedures to replace a HotPort 5020-LNK node. This procedure has
two parts. First, you have to save a configuration file and make a configuration
change to the operational node. Next, you have to apply the configuration file to
the replacement node.
Prerequisites:
•
One operational HotPort-LNK node
• Ethernet cable
• Administrator computer running Hot View Pro 10.10.0.0 or later
Note:
The operational HotPort-LNK node must run the same firmware as the
replacement node. If the replacement node comes with a later firmware version,
you must upgrade your operational node to use the same firmware before you
begin.
To prepare the operational node for a new link:
1.
Connect an Ethernet cable from the operational HotPort 5020-LNK node to
the computer.
2. Start HotView Pro.
3. Go to
Mesh > Add Mesh
4. Log into the operational HotPort-LNK node.
5. Save the configuration file of the node.
a. Right-click the node
> Save PTP Configuration from this HotPort
b. Save the configuration file to a safe place.
6. Configure the node to join a new node.
a. Right-click the node
> Peer Node Configuration
b. Enter the serial number of the replacement HotPort node.
7. Remove the Ethernet cable from the node.
To add the replacement node:
1.
Connect the Ethernet cable to the replacement node.
2. Go to
Mesh > Add Mesh
3. Log into the replacement node with the correct IP address and password.
4. Right-click the replacement node
> Apply saved PTP Configuration to this
HotPort
5. Right-click the replacement node
> Peer Node Configuration
6. Enter the HotPort serial number of the other node.
7. Make sure the system makes a link between the HotPort-LNK nodes. You
should see a green dotted line between the two nodes. A dotted green line
indicates a wireless connection.