FireplaceXtrordinair 35 Custom Builder, Руководство пользователя

Страница: 45 / 48

Optional Equipment
(for qualified installers only)
4 3
Travis Industries 9 3 5 0 8 1 1 6 0 3 1 0 0 0
2 Install the bushings into the grommets on the blower following the directions below.
Insert the bushings into
these two grommets.
a
b
Make sure the four grommets on the base of
the blower assembly are in place (they
dampen the blower, keeping it quiet).
3 Install the blower following the directions below.
LO
OFF
HI
a
Slide the blower into place, behind the gas control valve. Attach the blower to the two
studs at the back of the fireplace with the two included nuts.
NOTE:
Make sure the wires attached
to the blower are in place.
Position the wiring along the floor of the fireplace so it does
not contact the firebox or the moving parts of the blower.
VALVE
“ON/OFF
”
SOLENOID
b