FireplaceXtrordinair 35 Custom Builder, Руководство пользователя

Страница: 30 / 48

2 8
Operation
Travis Industries 9 3 5 0 8 1 1 6 0 3 1 0 0 0
Before You Begin
Warning: Read this entire manual before you use your new fireplace (especially the section "Safety
Precautions" on pages 2 & 3). Failure to follow the instructions may result in property
damage, bodily injury, or even death.
Warning: Do not operate appliance with the glass front removed, cracked or broken. Replacement of
the glass should be done by a licensed or qualified service person.
Location of Controls - See explanation below
AAAAA
AAAAA
AAAAA
AAAAA
AAAA
AAAA
AAAA
AA
AA
AA
Gas Control Valve
Gas Control Knob
Flame Adjust Knob
An instruction card for
operating the fireplace
is attached to the
inside of the fireplace
here. Replace it for
easy reference.
The pilot flame is located
below the front log.
On/Off Switch
Open the access door to
view the controls.
OFF
HI
LO
ON
OFF
MAIN BURNER
IGNITER
Pilot
Igniter
Optional
Blower
Control
Igniter
Optional Blower Knob This knob controls the speed of the internal convection blower that
pushes the heated air into the room.
On/Off Switch This control is used to turn the fireplace on and off.
Pilot Igniter The pilot igniter is used only to start the pilot. When pressed, it sends an
electrical charge to the pilot assembly. This creates a blue spark directly next
to the pilot, igniting the pilot flame.
Gas Control Knob This knob controls gas to the stove and pilot. There are three positions: ON,
OFF, and PILOT. The indicator line is to the right of the knob.
Flame Adjust Knob This knob controls the flame height from low ("LO") to high ("HI”). The
indicator line is below the knob.
? If using a remote control or thermostat, the On/Off Switch must be left "ON". Turning the On/Off
Switch "OFF" will keep the fireplace off always.