Kalea Bay Outdoor Fireplace
REV. 4-17-19 Page 23
FINAL PREPARATION
Fig. 26
Covering the entire fireplace floor is NOT permitted
in the shaded area.
Note:
Media amounts listed in Table 8 are guides and can
vary depending on media used. Ensure not to cover more
than ½ -inch above the actual burner tube and keep all
media within the burner pan area (See Figs. 24, 25, & 26).
Fig. 25
End view of burner with media.
Burner Pan End View Showing Media Placement
Proper Media Height
Burner Tube
Large Broken Glass in
Burner Trough and
Burnerpan
No Media on
Mesh Screen Cover
No Media in
Shaded Areas
INSTALLING HOOD(S)
The fireplace requires a hood to be installed into the upper opening of the firebox. All models require five (5) screws to
secure the hood to the fireplace except the 72-inch model, which uses seven (7) screws to secure the hood. The hood
protrudes 1-inch from fireplace opening. Fig. 27 shows hole location and installation process for hood installation. The
protruding area of the hood is to be angled downward for proper installation, see Hood Detail below.
Fig. 27
Installing hood(s) on the fireplace.
Hood Screw Locations
FRONT VIEW
SIDE VIEW
Hood
(Deflector Facing Downward)
Hood Detail
End View
