![background image](http://html.mh-extra.com/html/firegear/kalea-bay-ofp-60leco-n/kalea-bay-ofp-60leco-n_installation-and-operating-instructions-manual_2291695010.webp)
Kalea Bay Outdoor Fireplace
REV. 4-17-19 Page 10
This fireplace comes with two boxes
prepackaged inside and
outside the fireplace. Do not discard any boxes unless noted
to do so. Read the list below for the contents.
PART NUMBER
DESCRIPTION
QTY.
77140
Parts box (includes all parts in box)
1
VENT-6X12SS
6x12 vent kit (includes 2- stainless vents;
12- washers, 12- nuts; 12- screws & manual)
1
01-487
01-487 connector valve ½”
1
ST3-100-1027
Wire screen mesh
1
77116
10-foot Module Wire Harness
1
76207
Pilot cover
2
77139
FG Control Box Assembly
1
VCS-ECOBBUEXT120
120” extension wire harness for battery pack
1
BATTC
C-size batteries
4
(36”) 73230 (48”) 74230
(60”) 75230 (72”) 76230
Windshileld parts box (includes all items listed
below)
1
76119
Glass Holder - Right
1
76124
Glass Holder - Left
1
77129
8-32x ½” Phillips pan screw SS
11
(36”) 73131 (48”) 74131
(60”) 75131 (72”) 76131
Hood
1
(36”) KB-36-73120
(48”) KB-36-73120
(60”) KB-60-73120
(72”) KB-72-73120
Windshield (see part # for specific sizes)
1
The bottom support fin seen in several figure drawings on pages 11 to 14 has pre-punched holes on inside edge to
secure the fireplace into position before attaching cement board.
SINGLE-SIDED FIREPLACE
DIMENSIONS, FRAMING
AND CLEARANCES SECTION