FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY
2283
USER MANUAL
22/01/2010 12:52 PM
AT
UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN
ver1.doc
6/27
------------------------------------------------------------------
Finero Oy
–
The Quality Control Company
Tel. +358-5-7522 200
Haltonintie 5, FIN-47400 KAUSALA, FINLAND
Fax +358-5-3638 326
www.qacontrol.com
2 GENERAL
2.1 Tester
The High Voltage Power Supply is intended for testing of voltage range 0 to 2000 V DC test
voltage provided by a 750 VA transformer. The Tester measures the current. The current limit
is settable at current range 0 to 1000 mA.
2.2 Tester control modes
The Power Supply can be controlled either locally by means of front panel buttons, indicators
and analogy meter or in automatic test systems by a computer via RS-232 or IEE488 or USB
connection. Also logic or remote control of basic functions is possible.
2.3 Construction
The Power Supply is built in a 19" frame having height of 3U. The installation depth is about
370 mm. Also front panel components are about 40mm. There are handles of tester both sides
and legs below test
er. Legs must be taken off if tester assembled to 19” rack.
2.4 Calibration
The Power Supply is factory tested and calibrated to meet the accuracy requirements. The
equipment may be calibrated in our factory or by other means agreed separately. There are
removed measurement module, which can send to calibrated
2.5 Development
Due continuous development we reserve the right to make technical modifications to our
products without notice. Device's activity can deviate to some degree in this instruction from
the said resulting customized or other changes.
