Filtration Group PiW 2175, Перевод оригинальной инструкции

Страница: 24 / 60

Page 4
Translation of the original instructions PiW 2175, Filtration Group GmbH, 28.06.20, Mat. No. 72348069, Version 04
5 Intended use
DANGER!
Operation contrary to the intended purpose can
be dangerous!

Non-observance can result in serious or fatal injury.

The manufacturer is discharged from all liability and all
warranty claims are rendered invalid.
•
This PiW 2175 is only allowed to be used in accordance
with the operating conditions specified in the contract
documentation and in the original instructions.
All forms of use which deviate from or exceed the limits
of use described above are considered to be contrary to
the intended purpose.
DANGER!
Operation contrary to the intended
purpose can be dangerous!

Non-observance can result in serious or
fatal injury.

The manufacturer is discharged from all
liability and all warranty claims are
rendered invalid.
Prohibited:
•
Use for other purposes without prior
consultation with the manufacturer.
•
Use in hazardous areas unless explicitly
mentioned in the contract documentation.
•
Use with smouldering, burning or sticky
particles.
•
Use with highly explosive fluids or pastes.

Standard design for liquid group 2 according to pressure
equipment-directive 2014/68/EU article 4 (3) and
article 13.
6 Functional description
6.1 Principle of the process
Liquid flows through the coalescer element. Minute water
droplets "coalesce" there to form larger drops and any
impurities are retained. These large drops then sink to the
bottom and are guided to the water drain by a hydrophobic
cloth.
Fig. 1: Principle of the process
1 Coalescer
2 Droplet separator
Water drops
Small Large
Fig. 2: Principle of the process
Coalescer
element
Hydrophobic
cloth
Oil
Impurities