Filco Majestouch Convertible 2, Руководство пользователя

Страница: 25 / 72

Two options for Power Supply : one method is to use
AA batteries (left page diagram B) and another method
is to use USB connection (left page diagram C).
When using USB power supply, if the USB cable is
unplugged, it will automatically switch to battery
power. For further understanding of related contents,
please reference page 30.
When the power is supplied through the USB port of
the computer, press the wired connection toggle key
(USB key) to enter device toggle mode, and at this
instant, the Bluetooth connection will be disconnected
and connection switched to USB. For further
understanding of related contents, please reference
page 31.
USB power supply may be via the USB port of the
computer or the USB-AC power adapters (such as
：
USB
charger) etc.. In addition, USB power supply does not
have a rechargeable function for manganese batteries.
Bluetooth Connection LED Lamp Lit Modes
: lit : flash : not lit
Connection Flow Diagram
Device Toggle Mode
• [Ctrl] + [Alt] + [Fn] pressed simultaneously
Pairing Mode … After displaying the
Ⓐ
, pairing LED lamp (blue)
will flash independently for about 60 secs
• when pairing mode is enabled
Indicator for Low Power
• when the remaining power in the battery is insufficient
Indicator for Failed Connection … After displaying the
Ⓐ
, pairing
LED lamp (blue) flashes slowly for about 10 secs
• unable to locate installed device * page 29
• when the pairing information is deleted from the personal computer
Indicator for Change / Toggle Device
Ⓐ
• when any one Bluetooth device registration/toggle keys
①〜④
is
pressed for already registered or not registered devices
• when switching to USB power supply wired connection * page 31
• when clear device button is pressed
• when USB cable is connected
Ⓐ
Indicator for Connection completed
• when pairing operation is completed
• when Bluetooth connection is successful
Low Power Indicator LED lamp flashes
red
flashes blue and red back and forth for about 4 secs
red
blue blue
Pairing LED lamp flashes for about 60 secs
blue blue
Both lamps simultaneously flashes 3 times
×3
red blue blue
Pairing LED lamp flashes slowly for about 10 secs
blue blue
Both lamps will lit simultaneously for about 10 secs
red blue blue
Connected
Device Toggle Mode
Pairing Mode
* Page 26
[Procedure 1]
From
①〜④
, press any key
to enter registration
* Page 27
[Procedure 2]
Personal computer
installation
After
60secs
Power On
Standby Status
Press
clear device button
1st Time
Press
[Ctrl] + [Alt] + [Fn]
2nd Time onwards
Mode • Operation LED Lamp Lit Mode
* After pairing, make sure a cable is disconnected
when switching on the keyboard, press any key
and the memory will automatically connect to
the last used device.
Succes
sful
pairing
!!
25