CIE-A-200 Control Panel Engineering and Commissioning Manual
66
FIRE ALARM SYSTEM NOTICE
To Enable the Control Panel Keypad
The user controls are accessed from Access Level 2 (
USER
) which is reached as follows:
Enter your access code, eg 1234,
followed by
ENTER
, or insert the
KEY
and turn it clockwise.
The
CONTROLS ENABLE
light will switch
ON
, you are now in Access Level 2 (
USER
) and you may
proceed to silence and reset the system.
To prevent unauthorised operation the controls should be kept disabled and the code / key kept secure under
the control of the responsible person.
To Manually Operate the Fire Alarm Sounders
To sound the alarms press the
SOUND ALARMS
button at Access Level 2 (
USER
) as above.
Following a Detector or Manual Call Point Operation
The
FIRE
LED will illuminate, the fire alarm sounders and the internal panel buzzer will operate as
programmed. Take appropriate action as defined by the emergency plan for the premises.
To silence the alarms press the
SILENCE ALARMS
button at Access Level 2 (
USER
) as above, then
establish the cause of the alarm and enter the details in the log book.
Reset any Manual Call Points which may have been operated, or if a detector has been operated be sure
that the cause of the alarm has been removed, before resetting the system by pressing the
RESET SYSTEM
button at Access Level 2 (
USER
) as above.
Following a Fault Condition
The appropriate fault LEDs will illuminate. The internal panel buzzer will sound. To mute the internal panel
buzzer, press the
SILENCE BUZZER
button at Access Level 2 (User) as above. Investigate and rectify the
appropriate fault (competent persons).
To Test the Indication LEDs
Select the
Test Display
prompt with the
UP / DOWN
keys, then press
ENTER
at Access Level 2 (User).
To Disable the Control Panel Keypad
When finished with the controls above, press the
ESC
button,
or
turn the key off and remove it.
The system
will return to Access level 1 (
NORM
)
The controls enabled light will have switched off and the controls will be disabled.
Important Notes
It is a requirement of the
Workplace Regulations
that your Fire Alarm System must be regularly serviced by
competent persons.
CONTROL PANEL INSTRUCTION NOTICE
FIRE ALARM COMPANY
:
_________________________________________________________________________
ADDRESS:
_____________________________________________________________________________________
For service phone:
___________________
(Working hours)
____________________
(Out of working
hours)
