CIE-A-200 Control Panel Engineering and Commissioning Manual
10
Cabinet Installation
Surface Mounting
The three mounting holes should be used to secure the cabinet to a solid wall using suitable screws of at
least 50mm in length. Ensure that a minimum gap of 50mm is left between the sides of the back box and any
wall or projection (such as another box).
Flush Mounting
A cradle, part number
23-0239
(sold separately)
must be used when flush mounting the panel. The flush
mounting hole size is 354mm wide x 334mm high.
When flush mounted the panel will sit at a depth of 83mm into cavity and have 36mm protruding from surface.
SU
RF
AC
E M
OUN
T FIXIN
G
H
OL
ES
SU
RF
AC
E M
OUN
T FIXIN
G
H
OL
ES