Fiery E-750, Руководство по настройке, Страница: 98 / 184

4
4-42 Performing Setup from the Control Panel
PostScript Setup options
PS (PostScript) Setup allows you to set defaults for the E-750. Users can override most
of these defaults on a job-by-job basis. However, users printing from UNIX or DOS
command lines cannot override defaults from their applications. Therefore, you must
set defaults in PostScript Setup. For information about these defaults, see the
Printing
Guide .
T
O ACCESS
P
OST
S
CRIPT
S
ETUP OPTIONS
In the list of options that follows, default values, where applicable, appear in
square
brackets.
Scale to Fit
Yes/Off [Yes]
Specify whether to scale a document size to a selected paper size if the document size is
different from the paper size. With the No setting, if the document size is larger than
the selected paper size, the document is cropped to the paper size when printed.
Convert Paper Sizes
No Letter/Tabloid->A4/A3 A4/A3->Letter/Tabloid [No]
Specify whether to convert paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/Tabloid->A4/A3, a letter size
document is automatically printed on A4 paper.
Default Color Mode
CMYK/Grayscale [CMYK]
Specify whether to print color (CMYK) or Grayscale images to the E-750 by default.
CMYK gives you full color prints. Select CMYK as the Color Mode before performing
calibration on the E-750. Grayscale converts all colors into shades
of gray.
1. In the main Setup menu, choose PS Setup.
2. Enter the options appropriate to the printing requirements at the site.
3. When you have finished, save changes.