Fiery E-750 Скачать руководство пользователя страница 115

Страница: 115 / 184

5-3

General Setup options

You can specify E-750 system settings that affect all users, such as the name of the
E-750, system date and time, passwords, and Job Log printing.

Server Name

—Specify a name for the E-750. This is the name that appears in the

Chooser on an AppleTalk network.

OTE

Do not use the device name (Color-MFP) as the server name. If you have more

than one E-750, do not assign them the same name.

Date and Time

—Specify the system date and time, which are recorded on the Job Log.

Enable Printed Queue

—Specify whether to enable the Printed queue, a storage location

on the E-750 disk for recently printed jobs. You can reprint jobs from the Printed
queue without resending them to the E-750. If the Printed queue is not enabled, jobs
are deleted from the E-750 disk immediately after they are printed.

Jobs Saved in Printed Queue

—Specify the number of jobs to be stored in the Printed

queue. Jobs in the Printed queue take up space on the E-750 hard disk.

Содержание E-750

























































































































































































Результаты поиска

Содержание E-750

Отзывы:

Fiery E-750, Руководство по настройке, Страница: 115 / 184

Результаты поиска

Содержание E-750

Отзывы: