Fiery E-750, Руководство по настройке, Страница: 54 / 184

3
3-8 Preparing for E-750 Setup
The first time you perform Setup, you must use the E-750 Control Panel. Configure,
at a minimum, Server Setup, Network Setup, and Printer Setup, in that sequence.
After the initial Setup, you can change Setup options from the Control Panel
(
page 4-3 ) or Command WorkStation. Most Setup options can be set using any of
these methods.
If you do not configure the remaining Setups, the E-750 uses default settings. You
need to make settings appropriate for the printing environment at your site.
Network server setup requirements
For Novell, and Windows NT 4.0/2000/Server 2003 (using TCP/IP) networks, you
must configure the network servers for printing to the E-750
before you configure
E-750 network settings in Setup. For chapter references to information about network
server Setup, see the diagrams in
Chapter 1 .
To configure network settings in Setup, you must have a live network connection, so
the E-750 can query the network for zones, servers, and server-based queues.
Whenever the configuration of the E-750, the copier/printer, or the network itself
changes at your site, you can alter individual settings to correspond to the changed
environment. Changing network or port settings may require that you make changes
to other Setup options, as well.
N
OTE
:
You must configure the E-750 with the correct Windows
Windows NT 4.0/2000/Server 2003 domain name. This is especially important for
Windows printing, also known as SMB printing.
N
OTE
:
The E-750 does not support the Windows 2000 Active Directory Service.
When you use the E-750 in a Windows 2000 server environment, assign the E-750 to
a Domain or Workgroup.
Ensuring the copier connection
Complete the following steps before you configure the E-750 and the workstations that
will print to the E-750. A service technician will have performed some
initial
installation.