Fiery E-750 Скачать руководство пользователя страница 164

Страница: 164 / 184

7-12

Administering the E-750

REBOOT

THE

E-750

Press the Menu button on the Control Panel to access the Functions menu.

Use the Down arrow to scroll to Shut Down. Press the Set Button.

Use the Down arrow to scroll to Reboot System. Press the Set button.

The E-750 will reboot.

Restarting the E-750

Restarting the E-750 resets the E-750 system software, but does not reboot the entire
system. Network access to the E-750 is temporarily interrupted and all currently
processing jobs are aborted.

RESTART

THE

E-750

Turn on the copier using the main power switch.

Wait approximately three seconds, and press the Menu button on the Control Panel to
access the Functions menu.

Use the Down arrow to scroll to Shut Down. Press the Set Button.

Use the Down arrow to scroll to Reboot System. Press the Set button.

If an error occurs during startup, the activity light will turn red. Check the Control
Panel display for details of the error.

Содержание E-750

























































































































































































Результаты поиска

Содержание E-750

Отзывы:

Fiery E-750, Руководство по настройке, Страница: 164 / 184

Результаты поиска

Содержание E-750

Отзывы: