Fiery E-750, Руководство по настройке, Страница: 67 / 184

4
4-11 Network Setup options
Network Setup options
When you perform Network Setup, you configure the E-750 to receive print jobs over
the network systems that are used at your site.
If the E-750 is configured to enable more than one protocol, it automatically switches
to the correct protocol when it receives a print job.
In the Setup menu, choose Network Setup, where you specify network addresses
and names to be used by workstations, servers, and the E-750 when they
communicate with each other.
The Network Setup menu includes three submenus that allow you to choose port
types, protocols, and network services. You must perform Port Setup and enable at
least one port.
For each item you enable, you are prompted to enter settings for that item.
Default values, where applicable, appear in this manual with square brackets.
You should display and select options only for the network systems that are
currently used at your site. If your network requirements change, you can change
Network Setup at any time.