Fiery E-750, Руководство по настройке, Страница: 42 / 184

2
2-18 Setting up Network Servers
Tips for experts—UNIX workstations
Setting up the E-750 in a UNIX environment has the same requirements as setting up
any printer or new device:
• A distinct IP address is required for the E-750 as well as for each workstation on
the network.
• A name must be selected for the E-750 that goes with the IP address.
• The IP address of the E-750 must be registered for the network in a host database, and
also on the E-750 itself.
• At least one print connection (Print or Hold) must be published.
The following information applies especially to the E-750:
• The E-750 is a printer controller that understands lpd protocols.
• The E-750 has a remote printer name you must use in order to communicate with it
successfully.
For details, see the following section.
Important note about the remote printer name
Whichever UNIX system you use, the name used for the remote printer (or rp in the
/etc/printcap file) in configuring the E-750 must be one of the following :
print
hold
The remote printer name is also used when setting up a
Windows NT 4.0/2000/XP/Server 2003 workstation or
Windows NT 4.0/2000/Server 2003 server to connect to the E-750 over TCP/IP.
Enter the remote printer name when you set up your Windows NT 4.0/2000/Server
2003 printer, as the “Name of printer or print queue on that (lpd host) server” in the
Add LPR Compatible Printer dialog box.
For the Windows 2000/XP printer driver, enter the remote printer name for Queue
Name under LPR Settings in the Configure Standard TCP/IP Port Monitor
dialog
box.