Fiery E-750, Руководство по настройке, Страница: 62 / 184

4
4-6 Performing Setup from the Control Panel
Suspend Printing
Suspend communication between the E-750 and the copier. You must suspend
printing if you want to interrupt the current E-750 job and use the copier to
make copies or print another job first. Jobs continue to process on the E-750.
After you make the copies, select Resume Printing to continue printing jobs
from the E-750.
Resume Printing Resume communication between the copier and the E-750 after you have
finished making copies or printing other jobs.
Shut Down Shut down all E-750 activity in the correct manner and then restart. Use this
option instead of the power switch on the back of the E-750. The following
options are available from the submenu that appears:
Restart Server—Restarts the Fiery system software without shutting down the
E-750 operating system.
Shut Down System—Shuts down the Fiery system software and the E-750
operating system.
Reboot System—Shuts down and restarts the Fiery system software and the
E-750 operating system.
Clear Server
Clear all jobs in all server queues, as well as all jobs archived on the E-750 hard
disk, the index of archived jobs (in the Archive window), all FreeForm
™ masters,
and the index of FreeForm masters (in the FreeForm window). Check with your
administrator or operator before choosing Clear Server. If an Administrator
password has been set, you must enter it to access Clear Server.
Run Setup Enter the Setup menu and change Setup option settings.
Run Diagnostics
This function is provided for service representatives only. For information
about running diagnostics, contact your authorized service/support
technician.
Tray Alignment Use this option to adjust the placement of text and images on the page so
that they are correctly aligned on the sheet of paper and both sides of a
duplex sheet have the exact same alignment. For more information on this
function, see the
Job Management Guide .
Calibration Calibrate the E-750 using AutoCal. For more information, see the Color Guide . If
an Administrator password has been set, you must enter it to access Calibration.