Fidelity Electronics 19e, Руководство по эксплуатации, Страница: 35 / 73

35
5.
Instrument flashes between “ A____Y” ( Y means the number of
transactions accumulated) and total accumulated result.
6.
At this point: -

Press [Zero] to quit, or
 Press [CE/x10] to clear memory. After [CE/x10] is
pressed, instrument display Clear and M+ Indicator
disappears to indicate all no data is stored in memory.
6.8 Extended Display Mode
26
When F68 is set to OIML or NTEP, by pressing [CE/x10] the weighing
resolution will be temporary (for 5 seconds) changed to 10 times finer. Display
keeps flashing when instrument is displaying the extended result.
6.9 Product Code
This instrument supports product code entry. Maximum code length = 18
digits.
6.9.1 Enter a product code manually
27
a.
Go to F19.
b.
Instrument display H code followed by 6 digits. Enter the first 6
digits of the product code here, then press
[Print/M+] to confirm.
c.
Instrument display M code followed by 6 digits. Enter the7th ~
12th digits of the product code here, then press
[Print/M+] to
confirm.
d.
Instrument display L code followed by 6 digits. Enter the last 6
digits of the product code here, then press
[Print/M+] to confirm.
e.
Instrument displays F19.
f.
To go to other internal function, press [Unit] or [Func] or press
[Zero] to quite to operation status.
26
When F68 = OIML or NTEP.
27
If a product code is less than 18 digits, press [Print/M+] to skip all blank digits displayed
until instrument return to F19.