FIC AN19C, Руководство пользователя, Страница: 9 / 55

2-1
Installation
The mainboard has several user-adjustable jumpers on the board that allow
you to configure your system to suit your requirements. This chapter
contains information on the various jumper settings on your mainboard.
To set up your computer, you must complete the following steps:
?
?
n
Step 1 -
Set system jumpers
?
n
Step 2 -
Install memory modules
?
n
Step 3 -
Install the Central Processing Unit (CPU)
?
n
Step 4 -
Install expansion cards
?
n
Step 5 -
Connect ribbon cables, cabinet wires, and power
? supply
?
n
Step 6 -
Set up BIOS software
?
n
Step 7 -
Install supporting software tools
WARNING: Excessive torque may damage the
mainboard. When using an electric screwdriver on the
mainboard, make sure that the torque is set to the
allowable range of 5.0 ~ 8.0kg/cm.
Mainboard components contain very delicate Integrated
Circuit (IC) chips. To prevent static electricity from
harming any of the sensitive components, you should
follow the following precautions whenever working on the
computer:
1. Unplug the computer when working on the inside.
2. Hold components by the edges and try not to touch the
IC chips, leads, or circuitry.
3. Wear an anti-static wrist strap which fits around the
wrist.
4. Place components on a grounded anti-static pad or on
the bag that came with the component whenever the
components are separated from the system.
Chapter 2