manualshive.com logo in svg

FIC AN19C, Руководство пользователя, Страница: 32 / 55

Поделиться
Скачать
FIC AN19C Скачать руководство пользователя страница 32

3 - 8

AN19E/AN19C Mainboard Manual

MPS Version Control For OS

Specifies the Multiprocessor Specification (MPS). Version 1.4 supports

multiple PCI bus configurations by incorporating extended bus definitions.

Enable this for Windows NT or Linux. For older operating systems, select

Version 1.1.  The default is 1.4.

Options: 1.1, 1.4.

OS Select For DRAM > 64 MB

Some operating systems require special handling.  Use this option only if

your system has greater than 64 MB of memory. The default is Non-OS2.

OS2:

Select this if you are running the OS/2 operating system with

greater than 64 MB of RAM.

Non-OS2: Select this for all other operating systems and configurations.

Video BIOS Shadow

This option allows video BIOS to be copied into RAM.  Video Shadowing

will increase the video performance of your system.

Options: Enabled, Disabled.

Full Screen LOGO Show

This option allows you determine Full Screen LOGO display when POST.

Options: Enabled, Disabled.

Содержание AN19C
























































Отзывы:

Нет отзывов