FIC AN19C Скачать руководство пользователя страница 6

Страница: 6 / 55

1 - 4

AN19E/AN19C Mainboard Manual

Main Features

Easy Installation

BIOS with support for Plug and Play, auto detection of IDE hard drives,

LS-120

drives, IDE ZIP drives, Windows 98SE, Windows ME, Windows

NT, Windows 2000, Windows XP, and OS/2.

Leading Edge Chipset

VIA KT400 is a single-chip North Bridge for AMD CPUs with 200/266/333

MHz Front Side Bus with AGP 8X and PCI plus advanced memory con-

troller that supports PC1600/PC2100/PC2700 DDR SDRAM. VIA VT8235

is a Vlink client highly integrated controller that supports PC99-compliant

system. The VT8235 supports ATA133 protocol.

Versatile Main Memory Support

Accepts up to 3 GB DRAM using three DDR333 DIMMs from 256 MB to 3

GB with support for lightenning-fast (PC1600/PC2100/PC2700) DDR

SDRAM .

Enhanced PCI Bus Master IDE Controller with UltraDMA/33/66/100/

133 Support

Integrated Enhanced PCI Bus Master IDE controller features two dual-

channel connectors that up to four Enhanced IDE devices, including CD-

ROM and Tape Backup Drives, as well as Hard Disk Drives supporting

the new UltraDMA/133 Mode 6 protocol, standard PIO Mode 3, PIO

Mode 4, DMA Mode 2, DMA Mode 4, UltraDMA/100 Mode 5 devices

are also supported.

AMD Processors Support

The socket A compatible AMD Athlon

XP processor 1500+ to 2000+,

600MHz to 1.4GHz AMD Athlon

and AMD Duron

processor up to

1.3GHz.

Optional IDE RAID Level 0/1 Support

The optional Promise IDE RAID controller and two connectors offer

ATA100 and Level 0, 1 for backing up huge amount data in a more effi-

cient way.

Содержание AN19C
























































Результаты поиска

Содержание AN19C

Отзывы:

FIC AN19C, Руководство пользователя, Страница: 6 / 55

Результаты поиска

Содержание AN19C

Отзывы: