manualshive.com logo in svg

FIC AN19C, Руководство пользователя, Страница: 29 / 55

Поделиться
Скачать
FIC AN19C Скачать руководство пользователя страница 29

3 - 5

BIOS Setup

CPU Internal Cache

This controls the status of the processor’s internal cache area.  The default

is Enabled.

Options:  Enabled, Disabled.

External Cache

This controls the status of the external (L2) cache area. The default is

Enabled.

Options:  Enabled, Disabled.

CPU L2 Cache ECC Checking

This item allows you to enable/disable CPU L2 Cache ECC checking.

Options:  Enabled, Disabled.

Athlon 4 SSED instruction

This item allows you to disable Athlon 4 new SSED instruction. The default

is Enabled.

Options: Enabled, Disabled.

MP Capable bit identify

This item allows you to identify Athlon MP Processor, if this function is

Enabled. The default is Disabled.

Options: Enabled, Disabled.

Quick Power On Self Test

This category speeds up the Power On Self Test (POST). The default is

Enabled.

Enabled: This setting will shorten or skip of the items checked during

POST.

Disabled:  Normal POST.

ATA RAID & SCSI Card Boot

Setup the boot up priority either form onboard ATA RAID connector or SCSI

Card, if you select SCSI as the first boot at the option below item. The default

is RAID, SCSI.

Options: RAID, SCSI.

Содержание AN19C
























































Отзывы:

Нет отзывов