Fiat New 500, Руководство пользователя

Страница: 233 / 320

231
Fix&Go KIT
(where provided)
225) 226)
84)
DESCRIPTION
The Fix&Go quick tyre repair kit
fig. 236 is located in the boot, inside a
dedicated container and consists of:
one cartridge (A) containing sealant
and fitted with: transparent tube for
injecting the sealant (D) and sticker (C)
with the wording "Max. 80 km/h" to be
placed in a clearly visible position (e.g.
on the dashboard) after repairing the
tyre;
one compressor (B);
REPAIR PROCEDURE
Proceed as follows:
stop the car in a position that is not
dangerous for oncoming traffic where
you can change the wheel safely. The
car must be stopped in a lay-by, car-
park or parking or service area, and the
ground must be as level as possible
and sufficiently compact;
A
C
B
D
236
F0S1246
turn the ignition device to the OFF
position, apply the electric parking
brake and shift the gear to position P or
R;
put on the reflective safety jacket
before getting out of the car (if required
by the regulations in force). In any case,
follow the road safety laws in force in
the country where you are driving;
make sure that any passengers get
out of the car and go to a safe place
where they will not obstruct traffic or
be exposed to the risk of injury. In
case of puncture, change the tyre
respecting the laws of the country you
are travelling in;
insert the sealant cartridge (A)
into the corresponding compressor
compartment (B)and press it down
hard fig. 236. Remove the speed limit
sticker (C) and apply it in a clearly
visible position fig. 237;
wear the gloves;
M
A X
237
F0S1293
remove the cap from the tyre valve
and connect and screw the transparent
tube of the sealant (D) fig. 236 onto the
valve. If a 300 ml cartridge is present
the housing of the transparent tube
is provided with removable ring to
facilitate extraction. Make sure that the
ON/OFF button (E) fig. 238 is in the off
position (button not pressed);
E
G
L
238
F0S1262