Fiat New 500, Руководство пользователя

Страница: 114 / 320

SAFETY
112
Versions with reconfigurable
multifunction display
When the system is active and the lane
limits have not been detected, the lane
lines are grey and a dedicated icon is
shown in the dedicated top area of the
display.
Exiting a lane with detection of a
single limit
When the system is active and only,
for example, the left lane limit has
been detected, the car icon is shown
in the dedicated area of the display;
the system is ready to provide visual
warnings in the event of unintentional
exiting (direction indicator not activated)
of the lane to the left.
When the system detects that the car
has approached the lane line, the left
line on the display turns yellow and
the car icon shown on the display
becomes yellow.
When the system detects that the car
has approached the lane line and is
about to pass it, the left line on the
display (yellow) flashes and the car icon
shown on the display turns yellow.
The system operates in the same way,
but mirrored, in the event of exiting the
right lane when only the right lane limit
has been detected.
Exiting a lane with detection of
both limits
When the system is active, the lane
lines on the display become white to
indicate the successful detection of the
limits.
When both lane limits have been
detected, the car shown in the graphic
icon on the display changes green and
the system is ready.
In accordance with the different
conditions detected, the system can
attract the attention of the driver by
altering the lines that identify the lanes
on the display. In particular, the system
can alter their colour (from white to
yellow and vice versa), and make them
flash. Equally, the system alters the
colour of the car icon shown on the
display.
Changing the system settings
The settings of the system can be
changed through the Uconnect™
system (see description in the
dedicated supplement).
System limited operation warning
33) 34)
If the dedicated message is shown
on the display, a condition limiting the
system operation may have occurred.
The possible reasons of this limitation
are something blocking the camera
view or a fault.
If an obstruction is signalled, clean the
area of the windscreen by the interior
rear-view mirror and check that the
message has disappeared.
Although the car can still be driven in
normal conditions, the system may be
not completely available.
When the conditions limiting the
system functions end, this will go back
to normal and complete operation.
Should the fault persist, contact a Fiat
Dealership.
No hands on steering wheel
detection
If the system detects no hands from
the steering wheel during active system
intervention, the system will produce an
escalation of visual-acoustic warnings,
which will take 15 seconds to invite
the driver to put the hands on the
steering wheel. If you do not put your
hands on the wheel within this time, the
system will disconnect and provide an
additional warning for 5 seconds.
System Fault Message
If the system switches off and a
dedicated message is shown on the
display, it means that there is a fault on
the system.
In this case, it is still possible to drive
the car, but you are advised to contact
a Fiat Dealership as soon as possible.