Fiat New 500, Руководство пользователя

Страница: 117 / 320

115
WARNING Wear the rear seat belts as
shown in fig. 111.
111
F0S1259
WARNING When putting the back seat
to its normal position, make sure the
seat belts are positioned so they are
ready to use.
86) 87)
WARNING
86) Never press button (C) fig. 110 when
travelling.
87) Remember that in the event of an
accident, the rear seat passengers not
wearing seat belts are exposed to a very
serious risk and also represent a serious
danger for the front seat occupants.
SBR (SEAT BELT
REMINDER) SYSTEM
(where provided)
The SBR system warns the
passengers of the front and rear (for
versions/markets, where provided)
seats if their seat belt is not fastened.
The system warnings unfastened seat
belts with visual warnings (warning
lights on in the instrument panel and
icons on the display) and an acoustic
warning (see the following paragraphs).
NOTE Contact a Fiat Dealership to
deactivate this acoustic warning
permanently. The acoustic warning can
be reactivated at any time through the
display Setup Menu.
Seat belts warning light operation
When the ignition device is turned to
ENGINE, the warning light comes
on for a few seconds, regardless of the
status of the front seat belts.
With car moving slower than 20 km/h,
if the driver side seat belt or the
passenger side seat belt (with
occupant seated) is unfastened, the
warning light stays on constantly.
As soon as a speed threshold of
20 km/h is reached, with driver side
seat belt or the passenger side seat
belt (with occupant seated) unfastened,
an acoustic warning is activated
simultaneously with warning light
flashing for about 105 seconds.
Once activated, this indication cycle
stays active for the entire time if the
car is moving faster than 8 km/h or if
reverse gear is not engaged or until the
seat belts are fastened.
If the car speed drops to less than
8 km/h or if reverse gear is engaged
during the warning cycle, the tone will
be interrupted and the warning light
switches on fixed.
If the entire time has not elapsed and
reverse gear is not engaged, the
indication cycle is reactivated as soon
as the car speed exceeds 20 km/h
again.
Operation of rear seat belt icons
The icons are shown on the display
fig. 112.
P
POWER
A B
112
F0S1176
The icons shown on the display
indicate:
A: rear left seat belt;